RWS Air Chamber Lube

Today's airguns are basically the same design that have been around for a great many years. Although they are different from conventional firearms, today's airguns may be maintained easily because modern manufacturing techniques have been combined with high-tech materials. The heart of any spring-piston airgun is the compression chamber.

Though requiring minimal lubrication, the piston seal and chamber should be lubricated once every several thousand rounds. One or two drops of RWS Compression Chamber lube applied through the compression chamber port will quickly evaporate and coat the chamber with a fine film of clear Moly. After the lubrication is applied, ten to twenty rounds of ammunition should be fired from the gun to ensure the lubrication has evenly coated the compression chamber.

After the ten or twenty rounds have been fired, run several dry cleaning patches through the barrel to remove any lubricant discharged during the firing procedure. If cleaning pellets are used, be sure to use several cleaning pellets at a time, especially in magnum class airguns